Multi-functional Cutting CM100M is suitable for various soft, tough, fibrous and hard dry samples. It can be used for batch processing and continuous coarse crushing and fine crushing.
M1 cutting type, which handles fibrous, tough materials, such as tobacco, leather, circuit boards and so on;
M2 cross beater type, which can deal with the mid-hard, brittle materials (hardness no more than 6Mohs), such as slag, coke, soil and so on;
M3 rotor beater type, which can handle soft, food samples, such as cereals, feed and chemicals.

Work Principle

M1-cutting type The sample passes through the hopper into the grinding chamber and is cut by the shearing action between a rotor and a fixed cutting bar. When the sample size is smaller than the aperture on the sieve plate, the sample falls into the collecting bucket.
M2 -cross beater type M2 type grinds the samples through beating、impacting and cutting. The sample enters the center of the chamber through the hopper. The sample is crushed between the impact plate and the gear of the rotor. Once the sample size is smaller than the pore size of the sieve, they will enter into the receiving container. The beater rotor draws a large amount of air through the hopper channel, thus accelerate the speed of the crushed sample departing from the crushing chamber.
M3- rotor beater type The sample enters the center of the chamber directly through the hopper. The sample is crushed between the impact plate and the gear of the rotor. Once the sample size is smaller than the pore size of the sieve, they will enter into the receiving container. The quick locking design of the mill door ensures the convenience and fast access to the crushing cavity, and also ensures the convenience of cleaning.

Application

• M1 Cutting type, which handles fibers, tough materials, such as tobacco, leather, circuit boards and so on;
• M2 Cross beater type, which can deal with the mid-hard, brittle materials (hardness no more than 6Mohs), such as slag, coke, soil and so on;
• M3 Rotor beater type, which can handle soft, food samples, such as cereals, feed and chemicals.

Products advantages

• Through three different grinding accessories to achieve different functions, which is suitable for more wider range of samples.
• The final fineness is up to 100 microns. The size of the sample is controlled by the bottom sieve and sieve with different sizes can be selected.
• A large amount of sample can be processed continuously, ranging from a few kilograms to several hundred kilograms per hour.
• The three models can be equipped with small sample collection and cyclone separator system, which is convenient for sample collection, chamber cleaning and heat generation reduction.
• Equipped with crushing dust collection device to prevent cross contamination.
• It can be fixed on the tabletop and equipped with casters and easy to move the instrument.
• It has high safety performance, quick locking device and motor braking.
• The grinding process is rapid and produces less heat.

Technical Specifications

Feed size	<130 mm
Final fineness	< 300 μm
Motor speed	500~4000rpm
Time setting	0：01-5：59(min/s)
Batch quantity	4L
Interval mode	yes
Knives	stainless steel
Number of blades	4
Motor power	1.5KW
Power supply	220V,50Hz
Instrument size(W*D*H)	303*575*485mm
Package size(W*D*H)	705*475*600mm